5 — VoIP overview
5-58 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
This example:
• Allows for multiple digits to be entered following * or # for service codes
• Nested parentheses and parenthetical grouping is not allowed. A single pair of
parens delimits the complete digit map
• The interdigit timeout with this digit map should be configured to 4 seconds
(normally it is 16 seconds).
The following is a more complex example of a digit map:
(*67x.T|1167x.T|*82x.T|1182x.T|*70|1170|101xxxxx.T|*52|1152|*88x.T|1
188x.T|*90x.T|1190x.T|*[23]xx|11[23]xx|*[014]x|11[014]x|*5[013456789
]|115[013456789]|*6[012345689]|116[012345689]|*7[123456789]|117[1234
56789]|*8[01345679]|118[01345679]|*9[123456789]|119[123456789]|0.T|0
0|01x.T|[01][2-8]11|[01]911E|[01][2-9][023456789]xxxxxxxx|[01][2-9]1
[023456789]xxxxxxx|[2-8]11|911E|[2-9][023456789]xxxxx|[2-9]1[0234567
89]xxxx|[2-9].T|[2-9][023456789].T)
This example:
• The ^ (NOT match) operator is not supported, so ranges must be explicitly
enumerated, for example, [023456789] replaces [^1]
• The x, y (min and max variable repetition) operator is not supported so terms
instead use the open-ended x.T pattern
Dial plan configured using XML
In XML, the dial plan is named as a DigitMap, which is a string of characters with a
length limit of 1024 bytes. A dial plan can consist of several dial plan tokens. Each
token is a component of the overall dial plan. Each dial plan token is limited to 28
bytes in length. The following is an example of a digit map, and is the default dial
plan if no other plan is configured:
<DigitMap>
(***xx|911E|1911E|0911E|101xxxx911E|***xx|*xx*x.#|*xx*x.*xx#|*xx*x.*
x#|*31*xxxxxxxx|*xx#|#xx#|*#xx#|#001|x.T)</DigitMap>
This dial plan consists of three dial plan tokens:
1 (***xx|*xx*x.#|*xx*x.*xx#|
2 xx*x.*x#|*31*xxxxxxxx|
3 *xx#|#xx#|*#xx#|#001|x.T)
This example:
• Allows for multiple digits to be entered following * or # for service codes
• Nested parentheses and parenthetical grouping is not allowed. A single pair of
parens delimits the complete digit map
• The interdigit timeout with this digit map should be configured to 4 seconds
(normally it is 16 seconds).
Matching rules
Take the default dial plan as an example:
To Next Page
Loading...
