Contents
xxx March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Procedure 6-25 To reboot an ONT ............................................... 6-41
Procedures using CLI interface.................................................... 6-42
Procedure 6-26 To reboot an ONT ............................................... 6-42
Procedures using HTTP interface for Package C ONT ......................... 6-42
Procedure 6-27 To reboot a Package C ONT ................................... 6-43
Procedures using CLI interface for Package C ONTs ........................... 6-43
Procedure 6-28 To reboot a Package C ONT ................................... 6-43
Procedures using butt set.......................................................... 6-43
6.13 Tracing OMCI and protocol traffic ................................................... 6-43
Prerequisites ......................................................................... 6-44
Procedures using HTTP interface ................................................. 6-45
Procedure 6-29 To enable tracing ............................................... 6-45
Procedure 6-30 To disable tracing ............................................... 6-46
Procedure 6-31 To retrieve a trace log ......................................... 6-47
Procedures using CLI interface.................................................... 6-48
Procedure 6-32 To trace in real time or logging mode ....................... 6-48
Procedure 6-33 To specify logging option ...................................... 6-50
Procedure 6-34 To disable tracing in logging mode........................... 6-51
Procedure 6-35 To copy a trace log to a TFTP server ........................ 6-51
Procedures using HTTP interface for Package C ONTs ........................ 6-52
Procedure 6-36 To perform an OMCI trace for a Package C ONT ........... 6-53
Procedure 6-37 To perform a Protocol trace for a Package C ONT......... 6-53
Procedures using CLI interface for Package C ONTs ........................... 6-54
Procedures using butt set.......................................................... 6-54
6.14 Activating an ONT using an SLID ..................................................... 6-54
Prerequisites ......................................................................... 6-56
Procedures using HTTP interface ................................................. 6-57
Procedure 6-38 To view the current SLID settings ............................ 6-57
Procedure 6-39 To clear the SLID ................................................ 6-57
Procedure 6-40 To enter the SLID ............................................... 6-58
Procedures using CLI interface.................................................... 6-60
Procedure 6-41 To view current SLID settings ................................. 6-60
Procedure 6-42 To clear the SLID ................................................ 6-61
Procedure 6-43 To enter the SLID ............................................... 6-61
Procedures using HTTP interface for Package C ONTs ........................ 6-62
Procedure 6-44 To view current SLID settings ................................. 6-62
Procedure 6-45 To enter the SLID ............................................... 6-63
Procedures using CLI interface for Package C ONTs ........................... 6-64
Procedure 6-46 To retrieve the current SLID settings ........................ 6-64
Procedure 6-47 To modify the SLID.............................................. 6-64
Procedures using butt set.......................................................... 6-65
Procedure 6-48 To clear the SLID using a butt set ............................ 6-65
Procedure 6-49 To enter the SLID using a butt set............................ 6-65
6.15 XML file configuration data for package C ONTs .................................. 6-68
To Next Page
Loading...
