6 — ONT management using an ONT interface
6-34 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Procedures using CLI interface
The following procedure provides the steps to check the status of the ONT LEDs
using the CLI interface.
Procedure 6-20 To check the status of LEDs
1 Choose option 8, More options, from the Main menu. The Secondary menu
appears.
2 Choose option 6, Retrieve ONT LED status, from the secondary menu.
The ONT LEDs appear with their color, current LED state, and previous LED state
shown. For example:
In print_led_states
LED COLOR CURSTATE PRESTATE
===================================
EQPT GREEN OFF OFF
PON GREEN OFF OFF
IPTV GREEN OFF OFF
RFTV GREEN OFF OFF
POTS GREEN OFF OFF
MGMT GREEN OFF OFF
NTWK GREEN OFF OFF
DATA GREEN OFF OFF
VID GREEN OFF OFF
FAIL GREEN OFF OFF
BTRY GREEN OFF OFF
MOCA GREEN OFF OFF
PWR_LED GREEN ON ON
ALM_LED GREEN OFF OFF
WAN_LED RED ON ON
press enter key to continue...
where
LED is the mnemonic for an LED on the ONT. Each LED represents a condition or activity on the
ONT, such as the condition of the battery or the activity of a data link; see Table 6-7 for an
explanation of each LED.
COLOR is the color of the LED. The color of the LED represents the status of a condition or activity
on the ONT, such as red for failing battery or green for activity on the data link; see ONT-specific
unit data sheet for the meaning of a color for a specific LED and ONT type.
CURSTATE represents the current LED state, where OFF means the LED is not lit, ON means that
the LED is lit and the color is solid.
PRESTATE represents the previous state of the LED, where OFF means that the LED was not lit,
and ON means that the LED was lit and the color was solid.
3 Press ↵ to continue.
4 Choose option 11, Return to main menu, to return to main menu.
5 STOP. This procedure is complete.
Procedures using HTTP interface for Package C ONTs
Not applicable.
To Next Page
Loading...
