6 — ONT management using an ONT interface
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 6-37
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Procedure 6-22 To check the ranging state of an ONT
1 Ensure that the ONT is connected to the GPON.
2 Choose option 6, Retrieve ranging state, from the Main menu.
The current ranging state of the ONT appears. For example:
Ranging State = Initial State (Auto-Disable State = Normal State)
where the ranging states are described in Table 6-8
3 Press ↵ to continue.
4 STOP. This procedure is complete.
Procedures using HTTP interface for Package C ONTs
Not applicable.
Procedures using CLI interface for Package C ONTs
Not applicable.
Procedures using butt set
Not applicable.
6.11 Monitoring software download to an ONT
Software downloads are updates or upgrades to software features of an ONT.
Software updates and upgrades are performed at the CO, and downloaded from the
P-OLT to the ONT.
Table 6-9 identifies the software download states.
To Next Page
Loading...
