Alcatel-Lucent 7330 - Page 320

6 — ONT management using an ONT interface
6-52 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Please select trace file
===============
1. OMCI
2. DHCP
3. ARP
4. IGMP
Enter choice :
3 Choose the trace log to copy over to the server:
a Choose option 1 for OMCI.
b Choose option 2 for DHCP.
c Choose option 3 for ARP.
d Choose option 4 for IGMP.
The following appears:
Enter server IP address:
4 Type the IP address of the TFTP server.
The following appears:
Enter file name on the server:
5 Type the name of the file on the server where the content of trace log is to be
copied.
The system copies the trace log into the specified file on the TFTP server.
• If a trace log is not found, the following message appears:
No logs to retrieve
Press enter key to continue...
• If a trace log is found, the following message appears after the copying is
complete:
Done
Press enter key to continue...
6 Press ↵ to continue. The Secondary menu appears.
7 To return to Main menu, choose option 11, Return to main menu.
8 STOP. This procedure is complete.
Procedures using HTTP interface for Package C ONTs
The following procedures provide the steps to enable OMCI and Protocol tracing
using the HTTP interface for Package C ONTs.