6 — ONT management using an ONT interface
6-58 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
The SLID clear dialog box opens, as shown in Figure 6-34.
Figure 6-34 SLID clear dialog box
3 Click on YES to reset the SLID. The SLID window is refreshed with the default SLID
settings for the ONT.
4 STOP. This procedure is complete.
Procedure 6-40 To enter the SLID
1 Ensure that the ONT is disconnected from the PON optical cable.
2 From the SLID window, ensure that the SLID value is null or DEFAULT, as shown
in Figure 6-35.
Figure 6-35 SLID window
Note — After a SLID is reset, the SLID value is DEFAULT.
To Next Page
Loading...
