Alcatel-Lucent 7330 - Page 339

6 — ONT management using an ONT interface
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 6-71
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Wireless WiFi SSID configuration
wifiSsidAdmin Specifies the SSID administration status. The
options are:
• enable
• disable
<WifiSsid1>
<Wifi1SsidCfg
wifiSsidAdmin="enable"
wifiNetSsid="cigrg"
wifiNetSsidBc="enable"
wifiWps="enable"
wifiLegacy="disable"
secMode="wep" />
Value cannot be
changed from
default.
wifiNetSsid Specifies the SSID name; which is a 1 to 32
alphanumeric character string.
—
wifiNetSsidBc Specifies whether to enable or disable WiFi
SSID broadcast ID. The options are:
• enable
• disable
—
wifiWps Specifies whether to enable or disable WPS
status. This parameter can be set when the
WiFiChBW parameter is set to 40. The
options are:
• enable
• disable
—
wifiLegacy Specifies whether to enable or disable
legacy mode, supporting 802.1g 54 Mb/s
speeds. The options are:
• enable
• disable
—
secMode Specifies the security mode. The options
are:
• open
• wep
• wpa-per
• wpa-ent
—
WPA personal security configuration
You can configure the parameters when the secMode is set to wpa-per (personal)
wpaVer Specifies the WPA version. The value is an
integer from 1 to 2.
<Wifi1SecuWpaPersonal
wpaVer="1"
encryptionAlgo="tkip"
personalKey=""
groupKeyRenewal="3600" />
—
encryptionAlgo Specifies the encryption algorithm used.
The options are:
• aes
• tkip
—
personalKey Specifies the encryption key. The key is an
alphanumeric string of 0 to 32 characters
—
groupKeyRenewal Specifies the encryption key renewal
period. The value, in seconds, ranges from 1
to 65535 seconds. The default is 3600 s (1
hour)
—
WPA enterprise security configuration
You can configure the parameters when the secMode is set to wpa-ent (enterprise)
XML parameter Parameter values Sample XML Information
(4 of 5)