8 — I-010G-A unit data sheet
8-2 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
8.1 I-010G-A part numbers and identification
Table 8-1 provides part numbers and identification information for I-010G-A indoor
ONTs.
Table 8-1 I-010G-A part numbers and identification
8.2 I-010G-A general description
The I-010G-A indoor ONT provides the subscriber interface for the network by
terminating the PON interface and converting it to user interfaces that directly
connect to subscriber devices. The ONT is compatible with all existing subscriber
equipment.
The I-010G-A indoor ONT is designed to provide voice and data services to units,
such as a residence. The I-010G-A indoor ONT can be installed horizontally or
vertically. It provides an on/off push button
These indoor ONTs provide the following functions:
• FSAN GPON standards-compliant PON
• operates on the same PON with up to 64 other ONT units
• support remote management by network management
• IP video with multistage IGMPv3 (RFC 3376) or IGMPv2 (RFC 2236) for
channel change
• receives data through the PON over a nominal 1490 nm wavelength
• operates with any LT card
• complies with the CE certification
• ability to turn on an off the UNI interfaces independently
• provides optics that support received signal strength indication (RSSI)
• G984.4 standard and revised compliant OMCI interface for ONT management
and provisioning
Part number Mnemonic Description CLEI CPR ECI/Bar
code
3FE 51912 AA I-010G-A GPON I-series ONT, version A,
asymmetric, 1 Ethernet 10/100/1000
BaseT 28 dB variant (available in the
ETSI market)
———
3FE 51913 AA For ordering information, contact
your Alcatel-Lucent account
representative.
———
3FE 51914 AA For ordering information, contact
your Alcatel-Lucent account
representative.
———