NTP 103 — Install an I-010G-A indoor ONT
NTP 103-2 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Recommended tools
The recommended tools for this DLP are:
• #2 Phillips screwdriver
• 1/4 in. (6 mm) flat blade screwdriver
• wire strippers
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
Procedure
Use this procedure to install I-010G-A indoor ONTs.
Danger — Observe the local and national laws and regulations that
may be applicable to this installation.
Warning — This equipment is ESD sensitive. Proper ESD protections
should be used when handling the I-010G-A indoor ONT.
Caution — Keep the I-010G-A indoor ONT out of direct sunlight.
Prolonged exposure to direct sunlight can damage the unit.
To Next Page
Loading...
