Alcatel-Lucent 8028S - 1.8 Description of the Connectors; 1.9 Install a Comfort Wired Handset

SIP Business
8AL90341ENAAed01
12 /31
Description of the connectors
Various connections to allow phone extensions. The type of connectors you have depends on your
phone.
1111111111 2 2 3 3 44 4 555 5 66 6 7 77
66666666 4444 5555 5 77777
8028s
8018
8028s
8018
1
Add-on module/external ringer connector (SATA type).
2
Magnetic alphanumerical keyboard connector (RJ 9).
3
Universal Serial Bus (USB-a) connector for an audio equipment, a low
smartphone charger or USB stick.
For the 8018 DeskPhone, the USB connector is on the side of the
deskphone.
4
10/100/1000 Mbps Ethernet connectors to a PC (RJ45).
5
10/100/1000 Mbps Ethernet connectors to the enterprise network (LAN -
RJ45).
6
DC power jack for an external power adaptor.
7
Wired handset connector (RJ9).
3.5 mm, 4 pole jack (TRRS standards: CTIA).
CTIA standards
1
Microphone
2
Ground
3
Audio (right)
4
Audio (left)
Install a comfort wired handset
• Remove the rubber.
• Plug-in the wired handset to the appropriate connector
(refer to phone description).
• Make sure you position the cable correctly in the
compartment intended for that purpose: