EasyManua.ls Logo

Alcatel-Lucent 8028S - 7 Guarantee and Clauses; 7.1 Safety Instructions

Alcatel-Lucent 8028S
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SIP Business
8AL90341ENAAed01
30 /31
7 Guarantee and clauses
Safety Instructions
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a safe
distance between your pacemaker or implant defibrillator and the handset which includes magnetic
elements: 4 centimeters (1,6 inches) at least.
It is recommended to follow the standard acceptance procedures before using this equipment in human
safety critical areas (hospitals...).
The handset includes magnetic elements that may attract sharp metallic objects. To prevent injury,
before each use ensure sharp metallic objects are not stuck to the earpiece and microphone.
Avoid using phones (other than cordless type) during an electrical storm. There may be a remote risk
of electric shock from lightning.
Do not use the device in environments where there is a danger of explosion.
Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a regular
Public Switched Telephone Network (PSTN) connection. This can result in severe damage to the
phone.
Never allow your telephone to come into contact with water.
To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone, etc.)
which may damage the plastic parts of your telephone. Do not use aerosol cleaners.
This product is intended to be supplied, either via the Ethernet (LAN) port, or via the DC-in by a Certified
Direct Plug-In Power Unit approved as 'LPS' (Limited Power Source) against CSA/UL/IEC 60950-1 and
rated 48V dc, minimum 0.27A. Allowed power supply is: WA-13B48R Asian Power Devices Inc.
If you are connected to a POE connection do not use an external Power Supply.
The PoE (Power over Ethernet) devices that supply or receive power and their connected cables must
all be completely indoors.

Related product manuals