Alcatel-Lucent 8212 - Call Handling and Advanced Features

8212 DECT Handset - SIP User manual
8AL91447ENAAed01
13/32
3.5 Calling using speed dial key
First, you have to define the speed dial key. See chapter: Programming your personal directory.
• If you have defined a speed dial key (number 1 to 9), long press on the speed-dial key
to call your associated contact.
You are in communication.
• Hang up.
3.6 Redialing the last number dialed (redial)
• Long press
3.7 Receiving a call
You are receiving a call.
• Answer the call (Use the off-hook key of the handset or of the headset if connected).
• Silent ringing when receiving an incoming call. The handset stops ringing but you can
still answer the incoming call.
• Decline the incoming call and forward it to your voicemail (if voicemail is available).
This icon is displayed after the handset stops ringing.
Speak.
• Hang up.
3.8 Make a second call
This feature depends on the system configuration. If necessary, contact your administrator.
You are in conversation with one contact. You want to make a second call.
• Dial the number (If DTMF mode is activated, you have to deactivate this mode before
dialing the number).
or
• Send the call.
• You can talk to the second caller and the first one is on hold.
Other method
• Open the contextual menu.
• Hold call
• Use one of the following:
o Dial the number to call.
o Call your contact using your personal directory (Contacts).
o Call your contact using the company directory (Central directory).
• You can talk to the second caller and the first one is on hold.