8212 DECT Handset - SIP User manual
4.2.2 Selecting your telephone system
Your telephone can be programmed to function on 4 different compatible systems.
• Select the desired input (the chosen option is indicated by the radio button with a central
dot).
The selection is retained even after switching the telephone on/off. The selection of a specific system
forces operation on a specific system. This selection must be changed if one wishes to change system.
Selecting 'Auto. select' enables the telephone to connect automatically when it enters a system coverage
zone. If the systems programmed in the telephone have common coverage zones, the telephone selects
the first system found.
4.3 Display or modify the name of the connected system (network)
• Edit network
The name of the network is displayed.
• Enter the PIN Code (default code: 0000).
• Apply (Ok).
• Select the system to modify.
• Network name
Modify the name of the network.
• Apply.
• Network number
Modify the network number.
• Apply.
To Next Page
Loading...
Need help?
General
