Alcatel-Lucent 8212 - Language Selection and Other Features

8212 DECT Handset - SIP User manual
8AL91447ENAAed01
20/32
3.16.4 Other features
• Access MENU.
• Ring
• Ring Activate or deactivate ringer.
• Keypad tone Activate or deactivate the keypad tone (Off / Click / On).
• Confirmat. sound Activate or deactivate a signal when you confirm an action (On / Off).
• Coverage warning Activate or deactivate the coverage warning (On / Off).
• Charger warning Activate or deactivate a warning when the phone is charging (On /
Off).
• Low bat. warning Activate or deactivate beep emission when low battery level is
reached (On / Off).
• Ascending ringing Activate or deactivate the ascending ringtone (Progressive ringing)
(On / Off).
• Headset mode Activate or deactivate the headset mode (On / Off). If activated, the
handset doesn't ring when you receive an incoming call. You only hear the ringing in the
headset. If deactivated, when the handset rings you hear the ringing in the headset when
you receive an incoming call.
• Silent charging Select whether silent mode is on or off when phone is charging (On /
Off).
• Return to idle.
• Access MENU.
• Settings
• Time & date Define time and date format.
• Language Select the phone language.
• Security Activate or deactivate a timeout to trigger the automatic keylock, change the
keylock pin code or lock the function key.
• Handset name You can enter a name for your handset.
• Reset settings Reset the setting and go back to the default settings.
• Status Find out the software version of your phone.
• Auto answer Define how to answer an incoming call: by pressing on the off-hook key or
any key, OR by automatically answering the call with the earpiece or in hands-free mode.
• 2s key repeat For people with a disability, increases the repeat-key delay for the dial
by name feature.
• Apply.
• Return to idle.
The selection is retained even after switching the telephone on/off. The selection of a specific system
forces operation on a specific system. This selection must be changed if one wishes to change system.
Selecting 'Auto. select' enables the telephone to connect automatically when it enters a system coverage
zone. If the systems programmed in the telephone have common coverage zones, the telephone selects
the first system found.