EasyManuals Logo

Alcatel-Lucent 8212 User Manual

Alcatel-Lucent 8212
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
8212 DECT Handset - SIP User manual
8AL91447ENAAed01
4/32
This document describes the services offered by the 8212 DECT Handset when connected to an
Alcatel-Lucent Enterprise 8328 SIP-DECT single base station.
Operating conditions
The following conditions must be respected, notably concerning the use of radioelectric frequencies
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
To limit the risk of interference, people with pacemakers must keep the wireless telephone away
from their equipment (minimum distance of 15 cm/6 inches).
It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals…).
DECT equipment can only be used to establish links between fixed points if these links are
temporary.
The conditions of access to a DECT equipment telepoint network shall be stipulated by contract
with the operator of the authorized telepoint network concerned.
Do not expose your telephone to severe conditions (rain, sea air, dust, etc.).
Switch off the telephone before changing the battery.
You must not switch on or use your telephone near gas or inflammable liquids.
The headset includes magnetic elements that may attract sharp metallic objects.
There is a danger of explosion if the battery is replaced incorrectly. use only 2 rechargeable
batteries, rated: NIMH AAA Typical capacity: 600 mAh 1,2V.
The mains power socket used must be close to the charger/holder and easily accessible, so that it
can be used as an 'on/off' facility.
Battery charge: charge the battery for about 6 hours before initial use.
Use only recommended charging unit: 8212 DECT Handset desktop charger (3BN67356AA)
delivered with the handset.
With the following Power Supply Units:
- 8232 DECT Handset Desktop charger PSU Europe (3BN67335AA)
TenPao (Model S005AYV0500100) efficiency level VI (rating I/P:AC 100-240V, 0.2A; O/P: DC
5V, 1A)
Phihong (Model PSA05E-050Q) efficiency level V (rating I/P:AC 100-240V, 0.2A; O/P: DC
5V, 1A)
- 8232 DECT Handset Desktop charger PSU WW (3BN67336AA)
TenPao (Model S008ACM0500100 with UK,US,AUS plugs) efficiency level VI (rating I/P:AC 100-
240V, 0.3A; O/P: DC 5V, 1A)
- DECT Desktop chargers PSU India (3BN67377AA)
TenPao (Model S005AYI0500100) efficiency level VI (rating I/P:AC 100-240V, 0.2A; O/P: DC
5V, 1A)
To prevent possible hearing damage, do not listen at high volume levels for long periods.
The labels and icons presented in this document are not contractually binding and may be modified
without prior warning. The labels and icons displayed on your phone depend on the system to which you
are connected and may differ from those specified in this document.

Table of Contents

Other manuals for Alcatel-Lucent 8212

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent 8212 and is the answer not in the manual?

Alcatel-Lucent 8212 Specifications

General IconGeneral
BrandAlcatel-Lucent
Model8212
CategoryIP Phone
LanguageEnglish

Related product manuals