33
9.4
Redialling the last number dialed (redial)
9.5
Sending DTMF signals
During a call, you sometimes have to send DTMF signals, for example, for a voice message service, an automatic
switchboard or when remotely consulting an answering machine. To do this:
Press the star key (hold down for a few seconds).
9.6
Sending a calibrated cut-off
The calibrated cut-off activates functions such as transfer to another telephone set.To make a calibrated cut-off:
Press the 0 key (hold down for a few seconds).
9.7
Programming your personal directory
Your directory can contain up to 12 numbers
• Add new contact
• long press
OR
• access menu
• call log
• select the name of the person you wish to call
• send the call
• access menu
• contacts
•more
• add contact
• apply
• name:
• enter the name (10 characters maximum)
• apply
• select the type of contact
work: / mobile: / home:
• enter the number
• apply
•save
•yes
• return to idle
To key in the name : the keys in the numeric keypad include letters that you can display by pressing
them successively. Example: press twice in succession on 8 to display the letter "U". To insert a
pause in a number, press the 1 (hold down for a few seconds). To insert a measured break, press
0 (hold down for a few seconds).
To Next Page
Loading...
