Accessories
10
36
Other
10.1
Phone package
10.2
Chargers
Your phone charger is supplied with the following equipment:
• How to dock your phone on the desk support
• How to dock your phone with the USB cable
When you purchase your phone, it is equipped with a belt clip on the back.
You can remove this belt clip and replace it with the cover provided in the box
of your new phone.
• turn the belt clip by doing a counterclockwise quarter turn,
• remove the belt clip by pulling it towards you.
Put on the cover instead of the belt clip as shown in the picture.
Push the cover towards the back of the phone until the cover is clipped on.
An AC/DC adapter made of a body and a separate plug head that clips onto the AC/
DC adapator body.
A USB cable
A desk support for docking your phone
Put your phone on its support. Plug the USB cable into the 5V socket of the desk
support. Plug the other end of the USB cable into the AC/DC adapter. Plug the
adapor into the mains power supply.
Plug the USB cable into the USB port of your phone. The other end of the USB cable
can be plugged into the AC/DC adapter or into a computer USB port.
To Next Page
Loading...
