User Manual
8AL91433ENAAed01 24 /70
Receiving interphony calls
You can answer a call without lifting the handset. When you receive a call, you are automatically connected
in hands-free mode. The identity of the caller is displayed on the screen. This feature depends on the
system configuration. If necessary, contact your administrator.
To activate
• (in idle state) When activated, the key is lit blue.
When your caller hangs up, interphony mode remains active.
To deactivate
• (in idle state) The key switches off.
Interphony can be disabled by the administrator.
Mute, so that your contact cannot hear you
You can hear your contact but he/she cannot hear you:
From the set
• During a conversation.
• Disable microphone The key is blinking blue .
• Enable microphone The mute key no longer blinks .
From the headset
• Use the mute key of the headset, if there is one, to disable headset microphone or to resume the
conversation (only available on compatible headsets).
Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
This feature depends on the system configuration. If necessary, contact your administrator. Depending on
the system configuration, the DTMF can be activated by default.
If DTMF is not activated by default on your system:
• During a conversation.
• Use one of the following:
o Send DTMF
o Press the star key.
• Enter DTMF code.
The function is automatically cancelled when you hang up.
To Next Page
Loading...
