User Manual
8AL91433ENAAed01 25 /70
If DTMF is activated by default on your system:
• During a conversation.
• Enter DTMF code.
If DTMF is activated by default on your system, you have to deactivate DTMF before entering the code of a
feature: Deactivate DTMF (Deact DTMF).
Forwarding calls to your voice message service
• Select the forward icon (the icon depends on your phone: / ).
• Imm fwd to VM (Imm fwd VM) Forward is acknowledged (The forward icon becomes animated:
/ ).
• To return to the home page.
Consulting your voice mailbox
You are notified of a new event when the message key is flashing.
•
•
New voice message / x New voice messages
• Enter your personal code Display name of sender, with date, time and ranking of message.
• Consult (Review): listen to message.
•
When you have listened to the message, do one of the following.
o Replay: replay message.
o Erase: erase message.
o Call sender: call back sender of message.
o Forward msg: forward the message to another contact.
o Save: save the message
o / Exit: terminate consultation.
Sending a text message to an internal contact
This feature depends on the system configuration. If necessary, contact your administrator.
: If your set is not equipped with a magnetic keyboard, use the alpha-numeric keyboard to enter letters.
Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard. When in
alphabetic mode, the LED corresponding to the key remains lit up.
•
• Text mail /New text message /New text messages
• Send
•
Use one of the following:
o Enter the number of the terminal to receive the message.
o Enter the first letters of the name.
• Choose the type of message.
• To return to the home page.
To Next Page
Loading...
