User Manual
8AL91433ENAAed01 28 /70
Common hold
This feature depends on the system configuration. If necessary, contact your administrator.
Common hold allows to all sets in the same pick-up group to resume a call (internal or external) that has
been put on hold by one of the members of that group.
Putting on common hold:
• During a conversation.
• Press the Back/Exit key to display the Perso page.
• Press programmed key: Comm hold (by default).
Recover the call on hold from any sets defined in the same pick-up group (including your set):
• Recover the call on hold from any sets defined in the same pick-up group (including your set)
• Press programmed key: Comm hold (by default).
Call parking
You can place a call on hold and retrieve it on another telephone.
• During a conversation.
•
Park the call
•
Enter the number of the parking destination phone.
• Reach the 'Menu' page.
• Settings My services Consult Call pick up services Park/retrieve call
• Reach the 'Menu' page.
• Settings My services Consult Call pick up services Park/retrieve call
• Enter the number of the parking destination phone.
This feature is accessible via a programmed key.
If the parked call is not recovered within a preset time (default value 1 min 30), it is transferred to the
operator.
Making a second call during a conversation
• During a conversation.
•
New call The first call is on hold.
•
Number of second contact.
2.23.1.1 Other methods for calling a second contact
• Dial directly the number for your call (if DTMF mode is not activated).
• Name of second contact.
• Select the 'Redial' function (long press).
• Programmed line key.
To Next Page
Loading...
