Alcatel-Lucent DeskPhone 8001 - Using Hold and Recover (Switch Calling Line); Transferring Calls

8001/8001G DeskPhone
8AL90895USACed03
14/52
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call on one line at anytime, and the other lines
would be put on hold. As a result, you can switch between different calling lines on your phone.
If you want to...
Then...
Put a call on hold
-- Press the HOLD button,
- or press the soft key
Hold a line and switch to
another line
Press another Line button for the appropriate line
Resume a call on current
line
-- Press the Line button,
Resume a call on different
line
Select the line you want to retrieve, then press the line button
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the yellow-green and flashing Line button or "Hold" on the
LCD screen.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the
call.
Talk to the transfer
recipient before
transferring a call
(consult transfer)
-- 1) Press TRANSFER button or press XFER;
-- 2) Enter number;
-- 3) Press then transfer the call,
- or wait five seconds (default value) then transfer the call
Transfer to idle lines
or other numbers
without talking to the
transfer recipient
(blind transfer)
-- 1) Press TRANSFER button or XFER;
-- 2) Press
-- 3) Enter number;
-- 4) Press , then transfer the call;
- or wait five seconds(default)then transfer the call
Notes: today's Alcatel-Lucent OXO system does not support
blind transfer feature on 8001/8001G DeskPhone
Blind transfer to the
held line
-- 1) Press TRANSFER button or press XFER;
-- 2) Press the Line button of the held line