Alcatel-Lucent DeskPhone 8001 - Line Keys Configuration

8001/8001G DeskPhone
8AL90895USACed03
38/52
Audio Codec
Use the navigation keys to highlight the desired entry in the
Enabled/Disable Codes list, and press the / to move to the
other list.
Jitter Buffer
Type
The type of Jitter Buffer is Adaptive or Fixed, default is adaptive.
Min Delay
The min. delay range setting, default is 60.
Max Delay
The max. delay range setting, default is 150.
Normal Delay
The normal delay range setting, default is 120.
Other
Payload Length
The payload length setting, default is 30 ms.
High Rate Of G723.1
Enable/Disable High Rate of G723.1 feature.
VAD
Enable/Disable VAD feature.
Echo Suppression
Mode
Enable/Disable Echo Suppression Mode feature.
Side Tone
Enable/Disable Side Tone feature.
6.3 Line Keys
ITEMS
DESCRIBES
Line
Line is the default value.
Speed Dial
You can use this key feature to speed up dialing numbers that are often
used or hard to remember.
Speed Dial Prefix
You can use this key feature to speed up dialing a specific prefix number.
DTMF
You can use this key feature to send arbitrary key sequences via DTMF.
BLF
You can use the BLF (Busy Line Field) feature to monitor a specific user for
status changes on the phone.
Paging
You can use multicast paging to forward time sensitive announcements
out to people within the multicast group.