8.1.5 Reboot
You can use the reboot option to reboot the phone.
8.2 Advanced
8.2.1 Log
This feature is used by the administrator to manage the equipment, such as debugging, SIP etc.
If you want to set the 8001/8001G DeskPhone to one of the debugging levels, you need to use
the following user interface.
8.2.2 Auto-Provision
When you open this auto provision feature, the phone will carry out auto-provisioning after it
detects a different software or kernel (higher or lower) which is put on the TFTP, HTTP, HTTPS,
FTP server.
To Next Page
Loading...
