Alcatel-Lucent IP Touch 4008 - Page 16

All Rights Reserved © Alcatel-Lucent 2010
Page
16
proxy2_addr=
Enter the backup proxy server address
proxy2_port=
Enter the port number used by the backup proxy
server
registrar2_addr=
Enter the backup registrar server address
registrar2_port=
Enter the port number used by the backup
registrar server
outbound_proxy2_addr=
Enter the outbound proxy server address
outbound_proxy2_port=
Enter the port used by the outbound proxy
server
pcs_addr=
Enter the PCS server address
pcs_port=
Enter the port used by the PCS server
sip_transport_mode_survi
Enter the Transport mode in PCS mode :
- 0 = UDP or TCP
- 1 = UDP
- 2 = TCP
option_timer=120
register_expire=3600
Enter the lifetime (in seconds) of a registration
register_retry=30
Enter the number of retry to connect the
registration server
local_sip_port=
Enter the port number used by the SIP set
local_sips_port=
Enter the port number used by the SIP set used
in secured mode
sip_transport_mode=0
Enter level transport mode:
– 0 for UDP or TCP
– 1 for UDP only
– 2 for TCP only