3.8.4.
Speed dialing keys
The user can make a call by pressing one of the speed dialing key. The set automatically dials the
content of the key.
A speed dialing key is configured with:
– The first name and the last name of remote party
– The URI or the call number of the remote party
Speed dialing keys can be programmed:
– Locally on the set
– Via the set configuration file
If a speed dialing key is configured via the configuration file, it cannot be modified from the set.
3.8.5.
Voice mail
In SIP mode, the set can access voice mail via the voice mail key.
The voice mail key is configured with the voice mail URI or voice mail call number in the SIP
configuration file.
To access voice mail, press the voice mail key. When connected, voice guides are played to help
you select options from the set keypad. Digits are transmitted via DTMF coding.
When a new message has been received, the voice mail LED is on. LCD will indicate one more
new message after pressing voice mail key.
Note:
In conversation, a SIP set switches automatically to DTMF mode.
To Next Page
Loading...
