Alcatel-Lucent M7 - Page 80

80/91
Accessories
8AL90382ENAA ed03
7.3.3 LED description
• Steady yellow: the device is switched on.
• Blue steady: connected through Bluetooth
®
.
• Green steady: microphone is enabled/call in progress (Bluetooth
®
).
• Flashing green: incoming call (Bluetooth
®
).
• Flashing blue: pairing or connecting in progress (Bluetooth
®
).
• Red steady: microphone switched off during calls (mute).
• Flashing red: Low battery.
• Flashing slowly: the call is placed on hold (Bluetooth
®
).
7.3.4 Icons displayed on the screen
The icons are normally displayed for a couple of seconds on connection. The same symbol is
displayed in red when the connection is broken.
USB device connected.
Incoming call or call in progress via
Bluetooth
®
.
Incoming call or call in progress via
USB.
Music mode via Bluetooth
®
.
Music mode via USB. Headset connected.
Visible for pairing via Bluetooth
®
.
Volume adjustment (number of
bars
indicates the volume selected).
Reconnecting to Bluetooth
®
device. Microphone switched off (mute).
Bluetooth
®
device connected. Battery status.
7.3.5 Battery charge
Displayed automatically when there is 1 hour remaining and then every 5 minutes.
The number of bars in the battery icon indicates the charging status. The battery
needs charging when the icon turns red. Charging the battery with a USB cable.
7.3.6 Turning off and on
The Konftel EGO starts automatically when it is connected with the provided USB cable to the
desk phone or powered-up computer.
• Push the button to start the device manually.
• Hold down the button for five seconds to manually switch off.