EasyManuals Logo

Alcatel-Lucent OmniAccess 4504 User Manual

Alcatel-Lucent OmniAccess 4504
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 | Hardware Overview OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide
Minimum Software Requirements
The OmniAccess 4504, 4604, and 4704 require AOS-W 3.2.0 or later.
AOS-W software builds prior to version 3.2.0 do not support the OmniAccess 4504, 4604, and 4704. If
your network currently runs on a software build prior to 3.2.0, you must upgrade the software on your
master and local switches to 3.2.0 or later prior to installing an OmniAccess 4504, 4604, or 4704 WLAN
Switch in your existing network.
Package Checklist
z OmniAccess 4504, 4604, or 4704 WLAN Switch
z AC Power Cord (country-specific)
z Rack Mount Brackets with Hardware (for rack mounting)
z Flat Serial Cable (RJ-45)
z Rubber Feet (for table top deployments)
z Serial Console Port Adaptor (RJ-45 to DB9)
z AOS-W Software Documentation CD
z
AOS-W Quick Start Guide
z End User License Agreement (EULA)
Hardware Model Overview
NOTE
The master switch, its redundant master switch, and all of its local switches must run on the same
code of AOS-W. Once you upgrade your network and install an OmniAccess 4504, 4604, or 4704
WLAN Switch into your network, verify that the software version on your switch matches the rest of
the network. If the code shipped on the switch is prior to the version that you upgraded your
network to, you must upgrade the code on the switch to match the rest of the network.
NOTE
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the
carton, including the original packing materials. Use these materials to repack and return the unit to
the supplier if needed.
NOTE
Optional accessories, such as SFP modules, are available for use with an OmniAccess 4504, 4604,
or 4704 and are sold separately. Contact your Alcatel-Lucent sales representative for details and
assistance.
NOTE
The physical hardware overview covers all three switches: the OmniAccess 4504, 4604, and 4704 .
The difference between the three switch models is dependent on the licensing level purchased,
which is covered in About the OmniAccess 4504, 4604, and 4704 on page 7. The switch model
depicted in the illustrations throughout this section is the OAW-4504.

Other manuals for Alcatel-Lucent OmniAccess 4504

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent OmniAccess 4504 and is the answer not in the manual?

Alcatel-Lucent OmniAccess 4504 Specifications

General IconGeneral
BrandAlcatel-Lucent
ModelOmniAccess 4504
CategorySwitch
LanguageEnglish

Related product manuals