9
BASIC SETTINGS
The following settings should be done during installation.
See page 47 about Provisioning if you are responsible for installing or upgrading
many phones.
Note that all settings on the Basic tab also affect the user prole Default. Other user
proles can be changed individually. The settings on the Basic tab, except the name
and PIN for Admin, can be modied by any user. Other settings require a login as
Admin.
Setting time and region
Select Settings > Time & Region.
Select the time zone and, if you wish, correction for DST (Daylight saving).
It is also possible to set the time and date manually or choose a different time
server.
Select the region where you are.
This setting affects the signalling.
Save the setting.
The OmniTouch 4135 IP reboots with the new settings.
INSTALLATION
To Next Page
Loading...
Need help?
General
