33
SYSTEM
Select Settings > System.
Application restart
The Restart button restarts the phone application. This takes less than 30 seconds.
On phone: MENU > SYSTEM > RESTART (7,1).
System reboot
The Reboot button reboots the conference phone. The starting procedure may take
about two minutes.
On phone: MENU > SYSTEM > REBOOT ( 7, 2).
Factory reset
The Reset button resets the OmniTouch 4135 IP to factory default settings. All personal
settings, including account information, are erased.
On phone: MENU > SYSTEM > FACTORY RESET (7, 3).
Hard reset to factory settings
See page 38 about resetting the phone if you have forgotten the Admin PIN code.
SETTINGS
To Next Page
Loading...
