57
LOG
Select Status > Log.
The Log tab contains ve types of log messages and can be useful for trouble shooting.
Select the log you want to review and click on the Change button.
The Refresh button adds all new messages sent since the present log was chosen.
Application log
This shows the phone application messages. The log can be ltered from “Fatal” (only
the fatal error messages) to “Trace” (all messages).
The application log can for example be used for troubleshooting LDAP issues. (See the
administrator’s guide at www.openldap.org for information about common error codes.)
The Clear log button erases all content in the log.
SIP Trace
The SIP Trace logs the communication between the phone and the SIP PBX.
The Clear log button erases all content in the log.
It is possible to disable the SIP trace log
Select SIP logging Off and click on the Set button.
CHECKING STATUS AND LOGS
To Next Page
Loading...
