Alcatel-Lucent OmniTouch 4135 IP - Recording Calls; Starting, Pausing, and Ending Recordings

22
SETTINGS
NETWORK

Select Settings > Network.
DHCP Dynamic Host Conguration Protocol is used by network devices
(clients) to obtain the parameters necessary for operation in
the IP network. This protocol reduces system administration
workload, allowing devices to be added to the network with little
or no manual conguration.
DHCP should be set to On if no other information is given. When
set to On, all information on this page will be set automatically.
DHCP user class Leave blank if this option is not required by the DHCP server.
IP address IP address of the device (OmniTouch 4135 IP). The address