Alcatel-Lucent OmniTouch 4135 IP - Using the Web Interface (Continued); Web Interface Contact Export

35
CONNECTING A PA INTERFACE BOX
The OmniTouch 4135 IP can be connected to an external PA system using a PA
interface box.

Connect the PA-box to the AUX port on OmniTouch 4135 IP with the included
cable.

Connect the external amplier to the RCA connector marked with a speaker.

Connect the microphone mixer to the RCA connector marked with a microphone.
Changing the auxilary port setting

Select Settings > Basic.

Select PA under the heading Auxilary port to aktivate the functions for external
microphones and speaker system.

Click on Save.
HEADSET AND PA INSTALLATION AND SETTINGS
AUX port
PA interface box
To amplier/speakersTo mixer/microphone2.5 m connection cable
Always disconnect the power supply (Ether-
net cable when using PoE or AC adaper if
used) before disconnecting or connecting
equipment to the OmniTouch 4135 IP.