Alcatel-Lucent OmniTouch 4135 IP - Profiles; Using and Logging Out of User Profiles

14
These settings affect the Admin and Default proles. To change the basic settings of a
user prole, you need to log in with that prole.
Proles – edit name and PIN
We recommend that you change the PIN code from the default setting to protect the
settings.

Select Settings > Basic and click the Edit button on the account you want to
change.

Enter a new PIN code.

The PIN code may consist of 8 digits.

You can also choose to change the name of a user prole.

Click on the Set and Save buttons.

Make a note of the new PIN code and keep it in a safe place.

The administrator’s PIN code can only be reset with a complete reset to factory
settings!
Language

Select language using the list box and click on the Save button.
On phone: MENU > SETTINGS > BASIC > LANGUAGE (6,1,1).
Ring level
There are six volume levels plus a silent mode. You will hear the ring tone for each level
you select. If you select silent mode, only the blue LEDs on the phone ash when an
incoming call is received.

Select level using the list box and click on the Save button.
On phone: MENU > SETTINGS > BASIC > RING LEVEL (6,1,3).
Key tone
You can select whether or not you want a tone to be heard when you press a button.

Select On or Off and click on the Save button.
On phone: MENU > SETTINGS > BASIC > KEY TONE (6,1,2).
Recording
It is possible to turn off the recording feature. This setting can only be done by the
administrator and affects all proles.

Select On or Off and click on the Save button.
SETTINGS