Alcatel-Lucent OmniTouch 4135 IP - Settings (Continued); Checking System Status Parameters

29
SETTINGS
Search base The DN (distinguished name) of the search base
Example:
dc=domain, dc=com.
Username Leave this eld blank if the LDAP server does not require a
username.
Password Leave this eld blank if the LDAP server does not require user-
name and password.
Max hits The maximum number of hits to return for each LDAP search.
Display name Species how the search hits shall be presented on the display
in OmniTouch 4135 IP.
Example:
%cn - shows the cn attribute.
%givenName %sn - shows the givenName attribute and the sn
attribute with a space in between.
Sort results Sorts the search hits based on the Display name.
Number attributes Here you dene the attributes that shall be displayed for a
selected search hit.
Example:
mobile telephoneNumber - shows the mobile phone number and
ofce phone number on separate rows for the selected Display
name.
Country code By entering the country code where the phone is located, the
country code in any phone number attribute is ignored, if it is
identical.
Area code By entering the area code where the phone is located, the area
code in any phone number attribute is ignored, if it is identical.
External prex If a special prex is needed to dial external numbers, it should
be added here.
Min length for external prex
Restricts the external prex to be added only if the phone
number is longer than the min length. This makes it possible to
use short internal numbers.
Exact length for no external prex
The external prex in not added if the phone number has exactly
the entered length.
Number prex for no external prex
All numbers that starts with this number will not have the exter-
nal prex added. Useful if you know that all internal numbers
start with a certain number.