Alcatel-Lucent OmniTouch 4135 IP - Using the Web Interface (Continued); Web Interface Status Checking

42
<eap_md5>
<enable> false
<password>
<eap_tls>
<enable> false
<password>
<qos>
<dscp_sip> 0
<dscp_media> 0
<time>
<ntp> true
<timezone> UTC+01:00
<ntps> pool.ntp.org
<dst_save> false
<dst_auto> true
<dst_offset> UTC+2:00
<dst_start_xed> false
<dst_start_month> 3
<dst_start_week> 5
<dst_start_day> 0
<dst_start_time> 02:00
<dst_stop_xed> false
<dst_stop_month> 10
<dst_stop_week> 5
<dst_stop_day> 0
<dst_stop_time> 02:00
<sip>
<udp_transport> true Specify if UDP shall be used as transport.
<udp_port> 5060 Specify the UDP port to listen to.
<tcp_transport> false Specify if TCP shall be used as transport.
<tcp_port> 5060 Specify the TCP port to listen to.
<tls_transport> false Specify if TLS shall be used as transport.
<tls_port> 5061 Specify the TLS port to listen to.
<sips_transport> false Specify if SIPS shall be used as transport.
<rtp_port> 4000 Specify the start port for RTP trafc.
<outbound_proxy> Specify the URL of outbound proxies to visit for all
outgoing requests. The outbound proxies will be
used for all accounts and will be used to build the
route set for outgoing requests. The nal route set
for outgoing requests will consist of the outbound
proxies and the proxy congured in the account.
<use_stun> false Use Simple Traversal of UDP through NATs
(STUN) for NAT traversal. Default is no.
<stun_domain> Specify domain name to be resolved with DNS
SRV resolution to get the address of the STUN
servers. Alternatively application may specify
stun_host and stun_relay_host instead.
<stun_host> Specify STUN server to be used in
”HOST[:PORT]” format. If port is not specied,
default port 3478 will be used.
MANAGEMENT – UPGRADE AND CONFIGURATION