44
0: In-band
1: SIP message
2: RTP message
<no_vad> true Disable VAD? Default is VAD enabled.
<ec_tail> 0 Echo canceller tail length, in milliseconds.
<enable_ice> false Enable ICE?
<enable_relay> false Enable ICE relay?
<enable_presence> false Enable the use of presence signalling.
<enable_sip_replaces> true
<enable_blind_transfer> false
<tls>
<tls_password /> Password for the private key
<tls_method> 23 TLS protocol method from pjsip_ssl_method,
which can be:
0: Default (SSLv23)
1: TLSv1
2: SSLv2
3: SSLv3
23: SSLv23
<tls_verify_server> false Verify server certicate.
<tls_verify_client> false Verify client certicate.
<tls_require_client_cert> false Require client certicate.
<tls_neg_timeout> 0 TLS negotiation timeout in seconds to be applied
for both outgoing and incoming connections. If
zero, no timeout is used.
<account1>
<valid> true Shall always be set to true.
<name> User dened name of the account
<id> The full SIP URL for the account.
<registrar> This is the URL to be put in the request URI for
the registration.
<registrar2> Used for redundancy
<publish_enabled> false If this ag is set, the presence information of this
account will be published to the server where the
account belongs.
<initial_auth> false If this ag is set, the authentication client frame-
work will send an empty Authorization header in
each initial request.
<initial_algo> Specify the algorithm to use when empty
Authorization header is to be sent for each initial
request (see above).
<pidf_tuple_id> Optional PIDF tuple ID for outgoing PUBLISH and
NOTIFY. If this value is not specied, a random
string will be used.
<force_contact> Optional URI to be put as Contact for this
account. It is recommended that this eld is
left empty, so that the value will be calculated
automatically based on the transport address.
<require_100rel> false Specify whether support for reliable provisional
response (100rel and PRACK) should be required
for all sessions of this account.
MANAGEMENT – UPGRADE AND CONFIGURATION
To Next Page
Loading...
