Alcatel-Lucent OmniTouch 4135 IP - Page 52

50
MANAGEMENT – UPGRADE AND CONFIGURATION
Provisioning
Enable On enables Provisioning.
Use DHCP option Set to on if you want to use DHCP option for DM server address.
DHCP option Species which DHCP option to use.
File server address DM server address if not provided by DHCP option.
Upgrade override URI Use if the rmware upgrade les is located at a different address
than the conguration les.
HTTPS protocol Default is auto, but can be set to SSLv2 or SSLv3 if open-ssl
auto detection fails.
Certicate Here you can upload a certicate to the OmniTouch 4135 IP to
be used for authentication when using Provisioning.
Root certicate The public key in the root certicate is used to verify other
certicates when using Provisioning.
Private key Here you can upload a private key to the OmniTouch 4135 IP to
be used for authentication when using Provisioning.

Read more about certicates on page 21.
Setting up a Provisioning server
This is a description of a manual method to create the conguration les. This proce-
dure can be simplied using a Device management system.

Select Settings > Management.

Enable Provisioning and enter the server information.
Creating a global conguration le

Congure one phone with the basic conguration.

Click on Export to create a conguratuion le.

Edit the xml le in a suitable editor.

Delete all elements that shall be set by the local conguration le or shall be set on
the terminal.

Update frequency and pagename can’t be entered via the web interface.

Save the le with the name ot4135.xml on the File server address specied above.
Creating local conguration les

Save a copy of the conguration le for each conference phone on your location.

Delete all elements that are set by the global conguration le or shall be set on the
terminal.
The default name for each le is ot4135-<MAC>.xml, where <MAC> is the MAC