ALDI FERREX CLM80XA User Manual

AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
80V Lithium-Ion 20” Brushless Lawn Mower
MODEL: №. 10094 • 08/2019 • CLM80XA
15
2) Pick up the grass collection bag (16) by the handle,
position the rods of the collection bag (16) onto the
hooks on both sides of the rear discharge chute. (See
Fig. C2)
3) Release the rear discharge guard (15), ensuring
the guard (15) aligns correctly and ts fully into the
grooves of the collection bag (16). (See Fig. C3)
Removing / Emptying the grass collection bag (16)
- Removing (See Fig. D)
WARNING! Before you remove the grass
collection bag (16), switch o the mower,
remove the battery pack, and ensure the blades
have come to a stand still, and the engine is
cooled.
Raise the rear discharge guard (15) and hold it up.
Lift the grass collection bag (16) by the handle, and
remove the rods of the grass collection bag (16) from
the hooks on both sides of the rear discharge chute.
WARNING! Always check the rear discharge
guard (15) closes tightly before using.
Never lift the rear discharge guard (15) when the
lawn mower is in operation.
Emptying
As soon as you see mown grass debris on the lawn,
the grass collection bag (16) needs to be emptied.
1) Empty the grass clippings from the grass collection bag (16) into the
appropriate bin. Check with your local council for more information. Ret
grass collection bag (16) per previous instructions.
2) If any grass clippings are caught in the rear discharge chute, clean it using
a broom or similar extension.
3) Do not remove grass debris from under the deck, or on/around the
blades by hand or with your feet. Instead use suitable tools such as a brush
or broom.
4) To ensure that the grass clippings can be blown into the grass collection
bag (16), the rear discharge chute, and the inside of the mower deck must
be cleared of any blockage.
C3.
D.
C2.

ALDI FERREX CLM80XA Specifications

General

Brand	ALDI
Model	FERREX CLM80XA
Category	Lawn Mower
Language	English