3500W Digital Inverter with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. INF3800A • 03/2016 • 52299
(toll free)
28
AFTER SALES SUPPORT
(toll free)
3500W Digital Inverter with Pure Sine Wave
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. INF3800A • 03/2016 • 52299
Spark Plug
To ensure the engine is operating correctly, the spark plug must be properly
gapped and free of carbon deposits. Always check the spark plug cable is
firmly fitted to the top of the spark plug.
WARNING: Ensure the engine is switched off while undertaking
this task.
1. Pull the spark plug lead (22) off the spark plug (23) and then remove spark
plug (23) from the generator using the supplied 21mm Spark Plug Tube
Spanner (31) by rotating in a clockwise direction (Fig Y).
2. Remove carbon deposits using a wire brush.
3. Check for discoloration on the top of the spark plug (23).
The standard colour should be a tan colour.
4. Check the spark plug gap. The acceptable gap should be between
5. The recommended spark plugs are as follows:
BPR6ES (NGK) RN11YC (Champion) WR6DC (Bosch)
CAUTION: Check that no foreign material, debris, or dust enters the
crankcase.
Replacement spark plugs are available from purchase from lawn mower or
small engine repair shops.
Maintenance
Z.Y.
To Next Page
Loading...
Need help?
General