2 Safety Instructions
Disintegration hazards
• When power cables are connected, always
check direction of motor rotation. If incorrect,
vital rotating parts could unscrew.
• If excessive vibration occurs, stop separator and
keep bowl filled with liquid during rundown.
• Use the separator only for the purpose and
parameter range specified by Alfa Laval.
• Check that the gear/pulley ratio is correct for
power frequency used. If incorrect, subsequent
overspeed may result in a serious break down.
• Welding or heating of parts that rotate can
seriously affect material strength.
• Inspect regularly for corrosion and erosion
damage. Inspect frequently if process or
cleaning liquid is corrosive or erosive.
Entrapment hazards
• Make sure that rotating parts have come to a
complete standstill before accessing par
ts
inside the machine or starting any disman
tling
work.
• To avoid accidental start, switch off and lock
power supply before starting any dismantling
work. Assemble the machine completely
before start. All covers, connections and guards
must be in place.
12
To Next Page
Loading...
