5 Operating Instructions
These operating instructions descr ibe routine
procedures to follow before and dur ing the
start, running and stopping sequences of the
separator. If system documentation is available,
always follow the operating instructions therein.
If there is no system documentation, the
instructions below are to be followed.
5.1 Before first star t
Technical demands for connections and
limitations for the separator are listed in
Technical reference.
- Technical data
- Connection list
- Interface description
- Operating water demands
- Basic size drawing
- Foundation drawing
G0868741
Before first start:
• Ensure the machine is installed and assembled
correctly and that feed lines and drains have
been flushed clean.
• Fill oil in the oil bath. See oil change procedure
in section Oil change on page 159. For quality
of oil, see section Lubricating oils on page 166.
31
To Next Page
Loading...
