5.2 Normal operation 5 Operating Instructions
5.2.4 Stop
Stopping the separator.
1.
Turn off the oil feed.
2.
Perform a displacement of the oil by adding hot
water (not more than bowl volume).
3.
Perform a sludge discharge.
a.
Add opening water until a discharge sound
is heard (max. 3 seconds).
b. Wait 15 seconds.
c.
Add closing water for 15 seconds.
G0872331
4.
Fill the bowl up with water and stop the
separator.
N
O
T
E
Keep the bowl filled during run-down to minimize
the
vibrations.
5.
Wait until the separator has stopped (after ab
out
25 minutes).
Check rotation of motor fan (1).
!
W
A
R
N
I
N
G
Entrapment hazard
Make sure that rotating parts have come to a complete
standstill before star ting any dismantling work.
1
G0872491
38
To Next Page
Loading...
