8128 SIP Strobe Light (G2)
Web Interface Basic Settings
Web Interface Login
The web interface requires a password which is ‘algo’ by default. This password
can be changed in the Admin tab after logging in the first time.
Web Interface is accessed by entering 8128’s IP Address into the web browse.
Important: It is highly recommended to change the default password if the device is
directly connected to a public network.
Document 90-00100C
11/27/2019
Page 20
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
