8128 SIP Strobe Light (G2)
Authentication Password
SIP password provided by the system administrator for the SIP account used for
the associated Ring and/or Page parameter.
Basic Settings Tab – Features
Ring Limit
Typically set to no limit, this feature can be used to set a limit on how long the
strobe will ring before timing out. A new ring event is required before the strobe will
flash a light pattern and play the WAV file again
Page Timeout
A time limit may be set for an active page.
G.722 Support
Enable or disable the G.722 codec.
DTMF Detection Type
Different DTMF detection options are given.
Document 90-00100C
11/27/2019
Page 23
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
