8128 SIP Strobe Light (G2)
Advanced Settings Tab – Time
Network time is used for logging events into memory for troubleshooting.
Time Zone
Select time zone.
NTP Time Servers 1/2/3/4
The strobe will attempt to use Timer Server 1 and work down the list if one or more
of the time servers become unresponsive.
NTP Time Server Source
When “Use DHCP Option 42” is chosen, if an NTP Server address is provided via
the DHCP Option 42, that NTP Server will be used instead of the 4 mentioned
above. Alternatively, “Ignore DHCP Option 42” can be chosen to only use servers
mentioned above.
Device Date/Time
This field shows the current time and date as set on the device. If testing the
device on a lab network that may not have access to an external NTP server, the
“Sync with browser” button can be used to temporarily set the time on the device.
Document 90-00100C
11/27/2019
Page 40
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
