Alienware Alpha R2 - Configuring the Wi-Fi; Bluetooth; Turning on or off Bluetooth

7 After the download is complete, navigate to the folder where you saved the Wi-Fi
driver file.
8 Double-click the driver file icon and follow the on-screen instructions to install the
driver.
Configuring the Wi-Fi
1 Turn on Wi-Fi. For more information, see Turning Wi-Fi on or off.
2 Swipe-in from the right edge of the display, or click the Action Center icon on the
taskbar to access the Action Center.
3 Click Wi-Fi, and then click Go to settings.
A list of available networks is displayed.
4 Select your network and click Connect.
NOTE: Type the network security key, if prompted.
Bluetooth
Alienware Alpha R2 is shipped with Bluetooth 4.0.
Turning on or off Bluetooth
NOTE: There is no physical switch to enable or disable Bluetooth. It has to be
done through the computer settings.
1 Swipe-in from the right edge of the display, or click the Action Center icon on the
taskbar to access the Action Center.
2 Click Bluetooth to turn Bluetooth on or off.
100