Alienware Alpha R2 - Replacing the Processor Fan

Replacing the processor fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Connect the processor-fan cable to the system board (CPUFAN).
2 Align and snap the processor fan over the processor heat sink.
Post-requisites
1 Replace the top cover.
2 Replace the base cover.
39