Alienware Alpha R2 - Replacing the Antenna Modules; Procedure

Replacing the antenna modules
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align and slide the tabs on the antenna modules in the slots on the chassis.
2 Align the screw holes on the antenna modules with the screws hole on the chassis.
3 Replace the screws that secure the antenna modules to the chassis.
4 Route the antenna cable through the routing guides on the chassis and power-button
module.
5 Route the antenna cable through the cable-routing hole on the chassis.
Post-requisites
1 Replace the wireless card.
2 Replace the video-card fan.
3 Replace the top cover.
4 Replace the base cover.
70