6 | Safety instructions
Safety instructions
CAUTION: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
• Place the monitor on a solid surface and handle it carefully. The screen is
fragile and can be damaged if dropped or hit sharply.
• Always be sure that your monitor is electrically rated to operate with the
AC power available in your location.
• Keep the monitor in room temperature. Excessive cold or hot conditions
can have an adverse effect on the liquid crystal of the display.
• Do not subject the monitor to severe vibration or high impact conditions.
For example, do not place the monitor inside a car trunk.
• Unplug the monitor when it is going to be left unused for an extended
period of time.
• To avoid electric shock, do not attempt to remove any cover or touch the
inside of the monitor.
To Next Page
Loading...
