64 | Using AlienFX application
Pulse Descriptions
The effect makes the light flash with a short pause.
To make the adjustments:
1. Pick a preferred color from the color palette
or the list of PRESET COLORS. The selected
color and its RGB color codes will be
displayed on the right field.
NOTE: To change the color, use the up and down
arrow buttons beside the R/G/B boxes to edit the
color codes.
2. To
add the selected color to the list of YOUR
COLORS for quick access in the future, click
. At most 12 colors can be added to the list.
NOTE: To
remove an existing color chip from the
list, right-click on it.
3. Drag t
he BRIGHTNESS slider to adjust the
lightness of the color.
4. Drag the TEMPO slider to adjust the pulsing
speed.
Color Descriptions
The effect makes the LED light in a single static
color.
To make the adjustments:
1. Pick a preferred color from the color palette
or the list of PRESET COLORS. The selected
color and its RGB color codes will be
displayed on the right field.
NOTE: T
o change the color, use the up and down
arrow buttons beside the R/G/B boxes to edit the
color codes.
2. To
add the selected color to the list of YOUR
COLORS for quick access in the future, click
. At most 12 colors can be added to the list.
NOTE: To
remove an existing color chip from the
list, right-click on it.
3. Drag t
he BRIGHTNESS slider to adjust the
lightness of the color.
To Next Page
Loading...
Need help?
General
